2 Output / 2 Way Gas Line Manifold Push In

2 Output / 2 Way Gas Line Manifold Push In

Manufactured with high strength, stainless steel push-in fittings for easily, and securely connecting your draft system's gas lines.

Our 2 Output gas manifolds are rated to 100psi and include 2 gas line outputs and 2 x 1/4inch ball vales.

This unit can be turned into a 3 way manifold by removing the hex nut sealing the end of the manifold and adding a 1/4 inch ball valve (part 7162).

You can also attach a Gas Ball Lock Post with 1/4 Inch Bulkhead Assembly (part 7087) if you want to be able to easily disconnect/reconnect a gas line.

Features:
- Manufactured from durable aluminium, brass and stainless steel.
- Includes x2 holes at the top for easy mounting to your gas board or other surfaces.
- Each ball valve has a built in check valve to not only protect your regulator but also prevent gas or liquid migrating from one keg to another.

Please note that due to the check valve mechanism there is about a 2 psi pressure drop over the ball valves in these manifolds.

You will need to set the pressure on the regulator about 2 psi higher than the desired pressure in the keg.